BioMedTalk.COM  Forum - Life science, Medical science and Technology online board for the Scientific-Research Community of scientists, physicians, publishers, journalists, employers, job-seekers and the general public from all over the World to exchange ideas, post commentary, disseminate results and information of Life Sciences, Medical Sciences, Biotechnology, Health research, online debate and establishing new contacts.    
Bio & Med Science
Check Articles Rank (Hirsch index, Hirsch factor alternative) by author's name for the Life Science and Health, Biology and Medical research articles.
     
Just change the 'FamilyName Initials ...' to the author's name, e.g. Smith JH and click the “Go” button to retrieve the Articles Rank (Hirsch index, Hirsch factor alternative).
    
You are welcome to compare your Articles Rank (Hirsch index, Hirsch factor alternative) to the Articles Rank of your Colleagues or Boss.


Click the 'Go' button to retrieve Articles Rank (Hirsch index, Hirsch factor alternative).
Welcome to the BioMedTalk.com science Forum! Please, register for FREE, become a Member to our research Community and get a fully FREE Forums features including ranking articles by article index (Hirsch index, Hirsch factor alternative). BioMedTalk.com is the science website created to link researchers, scholars, physicians, science publishers and journalists working under research-related initiatives and technological development Programs as well as other Scientific, Education, Training programs and scientific-research Projects all over the World for the discovery in such disciplines as:
     Life, Biological, Medical, Health and Biomedical science as well as Biotechnology;
     Health and Food industry and technology (including genetically modified food - gm foods, genetically modified organisms, genetically modified animals);
     Pharmacology and toxicology (including pharmacokinetics, clinical pharmacology, pharmaceutical technology, environmental toxicology etc.);
     Environmental science and Management (including indoor environment, effects of global warming and bioterrorism, etc.);
     Energetic science (including alternative, renewable energy sources, fuel biotechnology, biodiesel, biogas, bioethanol etc.);
     Materials science and research (including biological activity of nanomaterials, nanotubes, nanoparticles, nanopowder, nanocomposites etc.);
     Society and science (including medical ethics, science ethics, Biometric, Genetic and Medical data usage etc.)
as well as applied scientists, stakeholders, manufacturers and the general public together for online scientific communication, discussion, debate and dissemination information of scientific research and its results.
BioMedTalk.com is a FREE service. You are welcome to search forum before posting a new topic. Also, take the time to read the Guidelines and Rules and find the article impact by Article Rank (Hirsch index, Hirsch factor alternative). Feel free to direct your advertising posts into an Advertising Category for establishing new contacts.*

BioMedTalk is looking for the Consortium to join the projects under Horizon 2020 Framework Programme for Research, Innovation and technological development for the results Dissemination. The most suitable calls are: CIP, ICT, INCO, ERA-WIDE, ERANET, HEALTH, KBBE, OCEAN, ENERGY, JPROG, NMP.

To calculate Articles Rank (Hirsch index, Hirsch factor alternative) of scientific articles published by certain Author, change the "FamilyName Initials ..." to the author's name, e.g. Smith JH and click the "Go" button.    We are inviting you to publish your partnership profile at BioMedTalk.com to initiate partners search and to launch new Cooperation projects.    FP7 project 230550 - Ethical - Promoting International Debate on Ethical Implications of Data collection, use and retention for Biometric and Medical Applications.    This Category is for promotion and facilitation of the technology transfer for the benefit of the innovators and the public. We are inviting you to publish information about inventions and patents at BioMedTalk.com to make it easier for business companies to find and to license.    This Category is for conferences promotion. We are inviting you to publish information about conferences at BioMedTalk.com.


Register at
BioMedTalk.com

Register
for FREE and gain access to fully FREE Forums features.
Please, take the time to read the Guidelines and Rules.

Contact Us
Contact Us and let us know how you like our service, Web site and feel free to give us suggestions on how we can better serve your needs.

Bookmark
BioMedTalk.com
Please, bookmark us by holding down the (Ctrl) button, and pressing once the letter D.

Search
BioMedTalk.com
You are welcome to search forums before posting a new topic.

Quicklink to an Advertising Category
Advertising
in this Category is FREE for BioMedTalk.com Members.

Quicklink to the After Hours Category
Life is not only about work. So, see our
After Hours Category.

BioMedTalk banners for Exchange

     




















External Links


Partner's Links

  #1  
Old Feb 10, 09, 00:06
sunnye sunnye is offline
Newbie
 
Join Date: Aug 2008
Posts: 10
Default Water chemistry

Tropical freshwater aquarium fish reside in a wide range of water habitats– from fast-flowing mountain streams, to great lakes, to slow-moving rainforest rivers. Each of these biotopes, besides having unique fish species, has unique water properties due to environmental factors. Because fish do come from unique natural water sources, their water in captivity should have similar characteristics. To recreate natural settings, the aquariast should have some knowledge of basic water chemistry, specifically pH, water hardness, and the nitrogen cycle.

PH
The pH scale is a scale which is used to measure the acidity or alkalinity of a substance. The scale ranges from 0-14, with 0 being the most acidic, and 14 being the most alkaline. Water with a neutral pH of 7.0 has an equal ratio of H+ ions to OH- ions. Water with a pH below 7.0, is considered acidic (having a more H+ ions than OH- ions), while water with a pH above 7.0 is considered alkaline or basic (having a more OH- ions than H+ ions). Almost all freshwater fish inhabit waters with a pH from 5.0-9.0, with the majority of these inhabiting water with a slightly acidic to neutral pH (6-7.5).
In aquaria, the pH of tap water can be manipulated though the use of phosphate, bicarbonate, and other buffers. However the pH may change despite these buffers. The development of a low pH can usually be attributed to decaying material such as plant and animal wastes. When the pH drops below 5.5, bacteria (Nitrosomonas) that break down ammonium are reduced, and the ammonium level rises.
Lowering the pH: The pH can be lowered by using a pH-lowering chemical (available at pet shops). Be aware that many pH-lowering products use phosphate-based chemicals. Phosphate is a nutrient that encourages algae growth. The pH can also be lowered by plants and fish during respiration, when CO2 is exhaled into the water. In hard water, the pH may be difficult to lower. First, soften the water by peat filtration or reverse osmosis, and then try lowering the pH.
Raising the pH: The pH can be raised in an aquarium by adding baking soda (bicarbonate) or making a water change (thus removing some organic buildup which reduces pH).

Water Hardness
The degree of water hardness relates to the amount of dissolved minerals, especially calcium and magnesium, in the water. Water hardness is generally expressed in the amount of calcium carbonate (CaCO3). Water hardness is measured in ppm (part per million), kH (carbonate hardness), and dH (degrees of hardness) or gH (general hardness). Water is expressed as soft (having few dissolved minerals) or “hard” (having many dissolved minerals. General levels of water hardness are expressed in the table below (1 dH is equivalent to about 17 ppm).
very soft 0 to 70 ppm 0 to 4 GH (dH)
soft 70 to 135 ppm 4 to 8 GH (dH)
medium hard 135 to 200 ppm 8 to 12 GH(dH)
hard 200 to 350 ppm 12 to 20 GH (dH)
very hard over 350 ppm over 20 GH (dH)
For most aquariasts water hardness is not particularly important. However, excessively soft water can cause problems. Because softer water has less buffering capacity due to a lack of CaCO3 (a natural buffer), and is subject to pH crashes, where the pH falls dramatically causing harm to aquarium inhabitants.
Carbonate Hardness: Carbonate hardness (kH) is not used as a measurement of hardness as often. KH includes the presence of minerals and charged ions, other than Ca and Mg, dissolved in water.
Changing the Water Hardness: Water hardness can be manipulated in several ways. To make the water softer, the water can be filtered through peat moss or filtered through a reverse osmosis system. Ion exchange resins also can be used to lower the water hardness. Boiling water for a period of time can also reduce its hardness. To harden the water, filter the water through dolomite or crushed coral until the desired hardness is reached.
Electrical Conductivity: By running an electrical current through the water, the level of conductivity can be found. Conductivity indicates the amount of ions (electrically charged particles) are in the water. The higher the water hardness, the greater the conductivity. Testing the conductivity of the water only finds the total amount of ions present in the water, and does not give the origin of the ions, whether they are Mg, Ca, or Fe.

Oxygen
Aquatic plants, animals, and bacteria depend on oxygen dissolved in water for respiration. Oxygen can be added to the aquarium through an air pump attached to some sort of air stone, by utilizing a filter that creates much surface disturbance, or by using a wet-dry filter system. Plants also add oxygen during the day with photosynthesis, although use oxygen at night during respiration. Thus, in a planted tank, the oxygen levels fall at night. At a higher temperature, less oxygen is dissolved in water and more aeration is required.

Carbon Dioxide
Carbon dioxide is another gas present in water as a byproduct of the respiration of organisms in the aquarium. During photosynthesis, plants require carbon dioxide. When there is a lack of carbon dioxide, the leaves of plants begin to yellow, and growth slows. Some of the carbon dioxide dissolved in water forms carbonic acid, which lowers the pH. If there is too much carbon dioxide in the tank, the fish will suffer.
Adding Carbon Dioxide: Carbon dioxide can be added by lower the water hardness to free CO2 from calcium bicarbonate. CO2 can also be added by the use of a CO2 system.

The Nitrogen Cycle
When fishes excrete waste, plants deteriorate, and food rots, the resulting waste does not just disappear. The waste, in the form of nitrogen compounds, is broken down into other compounds by bacteria, until the final product, nitrate NO3 is absorbed by plants or removed through gravel siphoning. This process of converting NH3/NH4 (of fish, plant, and other waste) into NO3 is known as nitrification. The steps of this process are most evident when the tank is first established or when the tank is out of balance.
When the tank is first set up, there are not nitrifying bacteria present (unless gravel or filters from an already established tank are used). A few hardy fish are added to the tank. By the first day, trace amounts of ammonia/ammonium (more toxic ammonia if the pH is above 7.0, less toxic ammonium when the pH is below 7.0) have built up. Within a few days, the ammonia level rises to a toxic level. By this time Nitrosomonas bacteria have begun to develop. These bacteria begin to break down the ammonia into nitrite (NO2), which is less toxic than ammonia/ammonium. Another type of bacteria, Nitrobacters, break down the nitrite (NO2) into less toxic nitrate (NO3). The nitrate is absorbed by plants or algae, or is removed when a water change is carried out. Although nitrate is less toxic than other nitrogen compounds, in high levels, it can be toxic.
This cycle also occurs when the tank becomes out of balance. If waste levels become too high, because of over-feeding, overstocking, and/or lack of water changes, ammonia levels will rise again. In this case, water changes should be performed until normal levels are restored.
This cycle can occur when the bacteria that breakdown organic wastes die. This can occur when the tank or filter is washed with soap or some disinfectant. If this occurs, the tank will have to be cycled again. Be aware that too acidic (below 5.5 pH) water or some medications can also deplete the bacteria population.

Nitrosomonas Nitrobacters
NH3 -----------------> NO2 -----------------> NO3
excess food absorbed by plants
fish waste removed during water changes plant matter
death

Last edited by Oleks; Feb 10, 09 at 04:12.
Reply With Quote
  #2  
Old Aug 1, 17, 06:57
JeroJuujarvi JeroJuujarvi is offline
Newbie
 
Join Date: Jul 2017
Posts: 5
Default

Informative! Thanks
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Soft water and hard water janelee Environmental Health 2 Sep 20, 10 06:26
Causes due to water pollution tanyaacatherine Environmental Health 5 Sep 20, 10 06:24
Heroes of Chemistry adolfoceli Biology 0 Oct 28, 08 05:36
Physical Chemistry cralston Chemistry 0 Jan 24, 06 20:49
Water Treatment Dwight Rose Water treatment 0 Sep 1, 05 03:51


All times are GMT. The time now is 01:53.


BioMedTalk is looking for the Consortium to join the projects under Horizon 2020 Framework Programme for Research, Innovation and technological development for the results Dissemination. The most suitable calls are: CIP, ICT, INCO, ERA-WIDE, ERANET, HEALTH, KBBE, OCEAN, ENERGY, JPROG, NMP.

Advertise with Us !

Contact Us !


* Any postings on BioMedTalk.com Board will become public. The BioMedTalk.com Board is not a professional advice forum. Moderators, Members are not eligible or authorized to offer health advice, prescription, est. Members post their personal opinions about Life Science, Medical or Health issues, products and/or services. But, Guests and Members should not rely solely on this information to make decisions. Feel free to post your message, but please consult your physician or healthcare professional when appropriate. BioMedTalk.com cannot determine the accuracy of information that posted to the Forum. All messages express the views of the author, and neither the owners of BioMedTalk.com, nor Jelsoft Enterprises Ltd. (developers of vBulletin) will be held responsible for the content of any message.

Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © 2004-2017 BioMedTalk.com .   All rights reserved.